Free Shipping on Orders Over $149 For a Limited Time! *Restrictions apply
The BenchMixer™ sets the new standard in vortex mixing. With advanced Q-Drive™ technology, the BenchMixer provides smooth instant vortexing of even the largest sample sizes, including full 50ml tubes. The unique counter-balance system creates maximum vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient and longer lasting operation.Other features include: “no-walk” suction feet, cold room/incubator compatibility and spill-proof electronic controls.
The MultiTherm shaker is a temperature controlled vortexer, useful for a variety of molecular biology applications. Despite its modest 8 x 11 in. footprint, all popular tubes and plates are compatible, including as many as six 50 ml tubes. Speed, time and temperature settings are continuously visible on the LCD, simultaneously showing both actual and selected values. Integral over-temperature control ensures long life, safety and sample integrity. Blocks are sold separately.
Specifications:
The Roto-Shake Genie® is a combination platform/tilt, shaker, rocker and specialized rotator that is able to mix tubes in different motions: rotating, rocking/shaking, rotating/rocking, rolling/rocking, or rotating/rolling. Or transform the unit into an orbital shaker with the optional 3-D Orbital Shaker attachment. The two-sided, easily removed 8 x 13.5 (20.3 x 34.3cm) stainless steel magnetic platform needs only a simple mechanical adjustment to convert from rotating to rocking or back again. Platform is magnetized to hold up to four metal clip plates per side, each holding same-sized or variably sized tubes for different mixing motions. Platform uses magnetic strips to accommodate up to two 6 x 6 (15.3 x 15.3cm) plastic bags per side, or a 12 x 12 (30.5 x 30.5cm) nonskid metal rocker tray for conventional rocker/shaker operations.
The Roto-Shake Genie will maintain its set speed from 32°F to 100°F (0°C to 38°C) and up to 95% relative humidity, making it ideal for use in cold rooms and incubators for complete and even soaking of membrane-based blot assays/washings. Cleaning and decontamination is easy. Rotating speed: 5 to 35rpm. Rocking speed: 10 to 70 cycles per minute. Rocking angle: ±10° from horizontal. Maximum capacity: 10 lb. (4.5kg). Dimensions: 10.5H x 20W x 9.9D (26.7 x 50.8 x 25.2cm). Increase capacity with optional expansion kits. Two year manufacturer™s warranty. Conforms to UL standard 3101-1; ETL listed.
A wide range of snap-on attachments for the Vortex-Genie® 2 and Vortex-Genie® 2T greatly expands these units™ usability. Each attachment is designed to produce its own unique mixing action, allowing the operator to choose the correct mixing action for any application. These attachments are made in various shapes and sizes and of various materials to accommodate almost all common tubes and containers.
*Multiple Sample Starter Set includes:
(1) 6" Platform, (1) 60-Microtubes Foam Insert, (1) Microplate Foam Insert.
**Large Sample Set includes:
(1) Recessed Platform, (2) Elastic Bands, (1) 9-16mm Tubes Insert,
(1) 14-29mm Tubes Insert, (1) 29-37mm Tubes Insert, (1) Blank Insert.
The Vortex-Genie 2T offers all the same features as the Vortex-Genie 2, including variable speed control, (which provides a range of operation from slow-speed shaking up to high-speed vortexing), and a multiple-position power switch that allows the operator to choose Touch On control or the Hands-Free continuous operation of the switch-activated start/stop mode. The Vortex-Genie 2T adds an integral timer: 1 to 60 seconds in the Touch On mode, 1 to 60 minutes in the Hands-Free mode. Action shuts off automatically after a set time in both modes. Unit can also be set to run continuously. Vortexing time is constant, with an accuracy of ±5% and a ±1% repeatability.
As with the Vortex-Genie 2, a wide range of attachments of various shapes, sizes and materials, each with its own mixing action, is available to allow the operator to mix almost all common tubes and containers with the correct mixing action for any application. The tough metal rubber-footed housing provides a stable platform that will not walk across your benchtop. Includes a 3-diameter (7.6cm) platform and a Pop-Off Cup. Base dimensions: 6.5L x 4.8W x 6.5H (165 x 122 x 165mm). Weight: 8.8 lbs (4kg). 120VAC, 60Hz, 0.65 amps. Two-year manufacturer™s warranty. ETL listed, conforms to UL standard 3101-1.
See: Vortex-Genie Accessories.
The Vortex-Genie 2® features variable speed control, providing a range of operation from slow-speed shaking up to high-speed vortexing. The three-position power switch allows the operator to choose Touch On control or the hands-free operation of continuous action, greatly increasing lab efficiency.
A wide range of attachments of various shapes, sizes and materials, each with its own mixing action, allows the operator to mix almost all common tubes and containers with the correct mixing action for any application. The tough metal rubber-footed housing provides a stable platform that will not walk across your benchtop. Includes a 3-diameter (7.6cm) platform and a Pop-Off Cup. Base dimensions: 6.5L x 4.8W x 6.5H (165 x 122 x 165mm). Weight: 8.8 lbs (4kg). 120VAC, 60Hz, 0.65 amps. Two-year manufacturer™s warranty. UL listed, CSA approved.
See Vortex-Genie® Accessories.
The very affordable Vortex-Genie 1 provides violent high-speed vortexing action for touch mixing. Single high speed eliminates operator variability. Enhanced vortexing ability increases efficiency, reducing vortexing time. Comes with Pop-Off Cup. Optional 3-diameter (7.6cm) platform attachment accommodates beakers, flasks or multiple tubes.
Highly stable on rubber feet, the Vortex-Genie 1 will not walk across your benchtop. Solid cast-metal base and stainless steel construction provide years of reliable service. Base dimensions: 6.5L x 4.8W x 6.5H (165 x 122 x 165mm). Weight: 8.8 lbs (4kg). 120VAC, 60Hz, 0.65 amps. Two-year manufacturer™s warranty. ETL listed.
See: Vortex-Genie Accessories.
The Disruptor Genie Cell Disrupter is ideal for any application that requires extremely violent high-speed agitation, such as difficult glass bead procedures, cell disruptions or homogenizations of yeast cells, bacteria, plant and animal tissue. The multidirectional action agitates and vortexes simultaneously at high speed, producing greater yields in less time. The Disrupter Genie is simple to use. Just set the auto-off timer from 0 to 15 minutes, or set it to run continuously. The single high-speed agitation eliminates operator variability.
Accommodates up to twelve 1.5mL snap-top microcentrifuge tubes. An optional holder accepts twelve 2.0mL screw top microcentrifuge tubes (see above). Or remove the microtube holder and snap on the Pop-Off Cup (included) for the high-speed vortexing of single test tubes. Enhance the performance of the unit with the use of soda-lime glass Disruptor Beads (sold separately). The Disruptor Genie is suitable for cold room or incubator use. Highly stable on rubber feet, it will not walk across your benchtop. Solid cast-metal base and stainless steel construction provide years of reliable service. Base dimensions: 6.5L x 4.8W x 7.5H (165 x 122 x 190mm). Weight: 9.5 lbs (4.3kg). Two-year manufacturer™s warranty. ETL listed. (120V, 60Hz, 0.65 amps)
Optimized Lab Vortex Mixer System
Continuously variable speed makes the Vortex Mixer VX-200 useful for a variety of applications, from gentle mixing to resuspending pellets. The unit has a circular orbit, rather than the elliptical orbit found on many other vortexers. This allows a vortexing motion to be achieved even at low speeds, a task that cannot be accomplished with elliptical orbit units.
Counter Balance System
Many vortex mixers prevent excessive vibration with added weight or suction feet which hold the unit in position. Labnet's Vortex Mixer VX-200 utilizes an optimized counter balance system to minimize vibration during operation and prevent the unit from walking across the bench, even at high speeds. The Vortex Mixer VX-200 is lightweight and has no suction feet, allowing it to be easily moved from one place to another. The Vortex Mixer VX-200 can be operated in either touch or continuous mode. When in touch mode, the motion is activated by depressing the sample head and stopped by removing the pressure.
Continuous Lab Mixer Operation
If the unit is set in the on position, the Vortex Mixer VX-200 will operate continuously until turned off. The small footprint and portability of the Vortex Mixer VX-200 allow it to be used almost anywhere. The unit is safe for use in temperature controlled environments. The CombiCup head supplied with the Vortex Mixer VX-200 can be used with a single tube or a whole handful. The unique over molding technology used in the manufacture of the CombiCup provides a sturdy plastic core surrounded with nonslip TPE. Optional heads accept microplates, microtubes, PCR strip tubes,15 and 50 ml tubes and blood tubes. All heads are friction fit - simply pull up to remove and press down to replace.
BOGO PROMO OFFER! Purchase one Benchmixer V2 Vortex Mixer with Reversible Flip Top Cup Head and Get One Free! Free item will be automatically shipped when you place your order. Hurry! This promo expires 11/30/23!
The Benchmark Scientific BenchMixer V2 features the smooth and powerful mixing ability of the original BenchMixer with a unique twist. The V2 model has a reversible rubber head that can be attached to the mixer 2 different ways. When vortexing single tubes, use the cupped surface, but when your application requires a flat or dimpled surfaces for mixing a uniquely shaped vessel, flip the head and reattach in the reverse orientation.
This vortexing mixer has a Q-Drive drive system which provides a smooth vortexing action minimizing noise and excessive vibrating. The mixer has a max speed up to 3200 rpms and provides an instand vortex of even the largest sample sizes including full 50ml tubes.
Specifications:
Bead beater ideal for lysing, extraction, or homogenization applications, utilizing an aggressive vertical mixing motion. Supplied with holders to hold vertically 12 microtubes (1.5 or 2.0 mL), 6 15 mL tubes, or 3 50 mL tubes, and 12 microtubes (1.5 or 2.0 mL) horizontally. Beads are also available and sold separately for complete bead beating solution. The Bead Genie, built in the USA, is compact compared to most bead beaters and homogenizers, yet heavy and durable.
Features:
Specifications:
RATCHETING CLAMP, VORTEX-GENIE MAX
MAX MICROPLATE FOAM INSERT FOR 2 PLATES (SET OF 2 FOR 4 PLATES)
MAX MICROPLATE FOAM INSERT FOR 2 PLATES
Interchangeable platform that can be used on all Genie Temp-Shaker products by simply removing existing platform and installing this one with NO tools required.
A non-slip tray platform that can be used on all Genie Temp-Shaker products by simply removing existing platform and installing this one with NO tools required.
Digital cell disruptor with complete control of speed and time. Ideal for releasing biological molecules from inside a cell. More than vortexing alone, patented multi-directional action simultaneously agitates and vortexes at high-speed producing greater yields in less time. Supplied with Universal Microtube Holder(tubes not included) and Pop-off Cup.
The Digital Vortex Genie 2 for applied biosystems is a specially configured mixer for applied biosystems' microplate protocols ONLY. The Microplate adaptor for applied biosystems’ microplate protocols, securely holds applied
biosystems’ 96-well plates and 384-well plates. Supplied with microplate adaptor for applied biosystems, elastic bands for applied biosystems.
The most programmable Vortex-Genie with digital control and display of speed and time. Provides precise mixing action at all times. Supplied with a cup head for a single tube, 3" platform for a beaker, a flask, or multiple tubes.
Your message has successfully been sent. We will respond back soon
Email entered was invalid.
Name, Email, and your message are all required
On Thursday, May 2nd, we will be implementing a new phone system. During this time our system will be completely down. Please contact us at info@labsource.com and we will get back to you as soon as possible.
