Free Shipping on Orders Over $149 For a Limited Time! *Restrictions apply
TheFull-Size Poxygrid® Test Tube Rack is constructed of durable steel wire with a baked-on vinyl finish. Racks have a mesh bottom and 1/4" (6.4mm) square holes on the top deck.
Use theHalf-Size Poxygrid® Test Tube Rack when space is limited. The epoxy-coated steel wire rack holds between 20 and 36 test tubes and is available in sizes which accommodate 10mm to 20mm test tubes.
Constructed of a special blend of polypropylene, these racks are rugged, autoclavable, and sink in a water bath. They remain stable- even while water is agitated. Grip racks feature retainer fingers that hold tubes firmly in place. Can be assembled quickly. Feature an alphanumeric matrix. Sold individually.
Silk-screened, easy-to-read numbers both ensure that each test tube can be quickly identitfied when using multiple samples and allow for robotic procedures. A researcher can program a robotic instrument with specific information for individual cells, which results in maximum accuracy and productivity. The round holes hold 13mm tubes securely, which limits lost samples and damage to instruments. The rack is ideal for automated liquid handling systems or any lab work using 13mm- where cell identification and location is critical. It has a standard 6 x 15 (90 total test tube places) configuration. The autoclavable rack is constructed from durable white polypropylene. Choose from standard numbering or serpentine numbering for precision instrument racks. Measures: 9-3/4 x 4-1/8 x 2-3/16" (25 x 10.5 x 5.6cm).
The Slant Test Tube Rack has two degrees of slant for a pair of uses. One side has a five-degree slant which produces a large surface area ideal for aerobic cultures. The other side has a 20-degree slant which creates a smaller surface area. It is intended for anaerobic cultures and reduces the drying out of the test medium during storage. Medium-filled tubes are autoclaved in the upright position and then tilted to the desired angle while still hot. The rack can be submersed in a water bath or used for incubating tissue cultures. The rack comes in a 13mm to 16mm test tube size or a 16mm to 20mm tube size. Each rack has 40 places (4 x 10), which are numbered and lettered for added convenience. Measures 10-1/2 x 6 x 5-1/8" (267 x 152 x 130cm).
The Full-View Test Tube Support is extremely versatile. The rack utilizes narrow pins which can be used as a support for full tubes or in the draining process of empty tubes (inverted tubes fit easily over the pins). Steam autoclavable at 250°F (121°C). Several sizes and tube capacities available.
This smaller model of the UniRackTM can hold up to 25 polystyrene or polyprolylene 10 and 12 mm tubes, such as 10 x 75 mm or 12 x 75 mm sizes. This rack will accommodate all types of screw cap microtubes from 0.5 to 2 ml made by manufacturers such as Simport®, Sarstedt, Nalgene, Bio-Plas, SSI, Sorenson etc... as well as 1 to 5 ml cryogenic vials. Flip the UniRackTM over and you can store up to 16 PCR or microcentrifuge tubes from 0.2 to 0.5 ml. Supplied without handles or anchor pins.
The MultiRackTM is compact, lightweight and stackable in order to save as much space as possible. This is why it is ideal for incubators, refrigerators, freezers, under lab hoods and on bench tops. Not only is it submersible but will also sink and maintain stability without tipping over.
The MultiRackTM is made of three-tiers to facilitate the insertion and stability of tubes. The base tier has rounded wells with drain holes. Convenient handles on each side of the rack will ensure a safe grip when carrying it around. Interlocking feet allow stacking. Series S600-13 will accommodate all tubes up to a diameter of 13 mm while series S600-16 will accept tubes up to 16 mm in diameter including 15 ml centrifuge tubes. Model S600-30 is perfect for accommodating up to 18 x 50 ml centrifuge tubes. Autoclavable at 121 °C for 20 minutes. Available in five attractive colors.
Dimensions: 293 x 115 x 65 mm H (11 1/2 x 4 1/2 x 2 1/2 in. H)
The MultiRackTM is compact, lightweight and stackable in order to save as much space as possible. This is why it is ideal for incubators, refrigerators, freezers, under lab hoods and on bench tops. Not only is it submersible but will also sink and maintain stability without tipping over.
The MultiRackTM is made of three-tiers to facilitate the insertion and stability of tubes. The base tier has rounded wells with drain holes. Convenient handles on each side of the rack will ensure a safe grip when carrying it around. Interlocking feet allow stacking. Series S600-13 will accommodate all tubes up to a diameter of 13 mm while series S600-16 will accept tubes up to 16 mm in diameter including 15 ml centrifuge tubes. Model S600-30 is perfect for accommodating up to 18 x 50 ml centrifuge tubes. Autoclavable at 121 °C for 20 minutes. Available in five attractive colors.
Dimensions: 293 x 115 x 65 mm H (11 1/2 x 4 1/2 x 2 1/2 in. H)
The MultiRackTM is compact, lightweight and stackable in order to save as much space as possible. This is why it is ideal for incubators, refrigerators, freezers, under lab hoods and on bench tops. Not only is it submersible but will also sink and maintain stability without tipping over.
The MultiRackTM is made of three-tiers to facilitate the insertion and stability of tubes. The base tier has rounded wells with drain holes. Convenient handles on each side of the rack will ensure a safe grip when carrying it around. Interlocking feet allow stacking. Series S600-13 will accommodate all tubes up to a diameter of 13 mm while series S600-16 will accept tubes up to 16 mm in diameter including 15 ml centrifuge tubes. Model S600-30 is perfect for accommodating up to 18 x 50 ml centrifuge tubes. Autoclavable at 121 °C for 20 minutes. Available in five attractive colors.
Dimensions: 293 x 115 x 65 mm H (11 1/2 x 4 1/2 x 2 1/2 in. H)
The MultiRackTM is compact, lightweight and stackable in order to save as much space as possible. This is why it is ideal for incubators, refrigerators, freezers, under lab hoods and on bench tops. Not only is it submersible but will also sink and maintain stability without tipping over.
The MultiRackTM is made of three-tiers to facilitate the insertion and stability of tubes. The base tier has rounded wells with drain holes. Convenient handles on each side of the rack will ensure a safe grip when carrying it around. Interlocking feet allow stacking. Series S600-13 will accommodate all tubes up to a diameter of 13 mm while series S600-16 will accept tubes up to 16 mm in diameter including 15 ml centrifuge tubes. Model S600-30 is perfect for accommodating up to 18 x 50 ml centrifuge tubes. Autoclavable at 121 °C for 20 minutes. Available in five attractive colors.
Dimensions: 293 x 115 x 65 mm H (11 1/2 x 4 1/2 x 2 1/2 in. H)
Poxygrid 50mL Tube Holder, Single Place
Poxygrid 50mL Tube Rack, 36-Place
Poxygrid 50mL Tube Rack, 8-Place
Rack for pipette can, 4 place, epoxy coa ted wire
No-Wire Grip Rack for 20mm tubes, 40-pla ce, White, 8/cs
No-Wire Grip Rack for 16mm tubes, 60-pla ce, White, 8/cs
No-Wire Grip Rack for 13mm tubes, 90-pla ce, White, 8/cs
No-Wire Rack for 30mm tubes, 21-place, B lue, 8/cs
No-Wire Rack for 30mm tubes, 21-place, R ed, 8/cs
No-Wire Rack for 30mm tubes, 21-place, W hite, 8/cs
The MultiRackTM is compact, lightweight and stackable in order to save as much space as possible. This is why it is ideal for incubators, refrigerators, freezers, under lab hoods and on bench tops. Not only is it submersible but will also sink and maintain stability without tipping over.
The MultiRackTM is made of three-tiers to facilitate the insertion and stability of tubes. The base tier has rounded wells with drain holes. Convenient handles on each side of the rack will ensure a safe grip when carrying it around. Interlocking feet allow stacking. Series S600-13 will accommodate all tubes up to a diameter of 13 mm while series S600-16 will accept tubes up to 16 mm in diameter including 15 ml centrifuge tubes. Model S600-30 is perfect for accommodating up to 18 x 50 ml centrifuge tubes. Autoclavable at 121 °C for 20 minutes. Available in five attractive colors.
Dimensions: 293 x 115 x 65 mm H (11 1/2 x 4 1/2 x 2 1/2 in. H)
The MultiRackTM is compact, lightweight and stackable in order to save as much space as possible. This is why it is ideal for incubators, refrigerators, freezers, under lab hoods and on bench tops. Not only is it submersible but will also sink and maintain stability without tipping over.
The MultiRackTM is made of three-tiers to facilitate the insertion and stability of tubes. The base tier has rounded wells with drain holes. Convenient handles on each side of the rack will ensure a safe grip when carrying it around. Interlocking feet allow stacking. Series S600-13 will accommodate all tubes up to a diameter of 13 mm while series S600-16 will accept tubes up to 16 mm in diameter including 15 ml centrifuge tubes. Model S600-30 is perfect for accommodating up to 18 x 50 ml centrifuge tubes. Autoclavable at 121 °C for 20 minutes. Available in five attractive colors.
Dimensions: 293 x 115 x 65 mm H (11 1/2 x 4 1/2 x 2 1/2 in. H)
Your message has successfully been sent. We will respond back soon
Email entered was invalid.
Name, Email, and your message are all required
On Thursday, May 2nd, we will be implementing a new phone system. During this time our system will be completely down. Please contact us at [email protected] and we will get back to you as soon as possible.
