Compatible with our tube strips and 96 well PCR plates. These strips are moulded from virgin polypropylene in our UK-based Class 7 ISO certified cleanroom production facility, and comply to the same stringent requirements as our FrameStar® range.
Axygen 0.2mL thin-wall 12 strip PCR tubes, available in an assortment of colors are designed to fit a wide variety of thermal cyclers. Ultra-thin and consistent wall thickness allows precise thermal transfer, even insertion cap ensures a tight fit to prevent evaporation.
Axygen® 0.2mL thin-wall 8 strip PCR tubes, available in an assortment of colors are designed to fit a wide variety of thermal cyclers. Ultra-thin and consistent wall thickness allows precise thermal transfer, even insertion cap ensures a tight fit to prevent evaporation.
This more convenient 0.2 ml tube strip incorporates individually attached caps. No need to carry two separate components in inventory. The strip includes 8 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer.
This PCR reaction strip is available with either flat (needle pierceable) or dome-topped individually attached hinged caps. While easily opened and closed with one hand, their positive sealing will fully protect the contents from evaporation during the whole thermal cycle. The cap has an integral seal preventing contamination with surface of lid.
While more easily handled than single tubes, the strip will precisely fit standard well spacing and can also be used with 8-channel hand-held pipettors. Manufactured under the most stringent conditions to attain the highest quality standards in the industry. Choice of colorless and four non-cytotoxic and non-metallic colors. Packed in tamperproof resealable bags.
Axygen® 1 x 8 strip domed PCR caps, in an assortment of colors, are designed to fit 8 strip PCR tubes and 96 well PCR microplates.
Axygen® 1 x 8 strip domed PCR caps, in an assortment of colors, are designed to fit 8 strip PCR tubes and 96 well PCR microplates.
Axygen® 1 x 8 strip domed PCR caps, in an assortment of colors, are designed to fit 8 strip PCR tubes and 96 well PCR microplates.
0.2ml Thin Wall Clear PCR Strip Tubes, 12 tubes/strip, 80strips/pk, 10pk/cs
Axygen 0.2mL polypropylene thin wall PCR tubes with flat caps are designed to fit standard 96 well blocks and are available in an assortment of colors. Ultra-thin and consistent wall thickness allows precise thermal transfer and even insertion cap ensures a tight fit to prevent evaporation.
Axygen 1 x 8 strip flat PCR clear caps are designed to fit 8 strip PCR tubes and 96 well PCR microplates.
Axygen 0.2mL thin-wall 8 strip PCR tubes, available in an assortment of colors are designed to fit a wide variety of thermal cyclers. Ultra-thin and consistent wall thickness allows precise thermal transfer, even insertion cap ensures a tight fit to prevent evaporation.
Simport Reaction Strips include 8 or 12 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer, therefore reducing PCR reaction time in most 96-well V bottomed thermal cyclers such as MJ Research, Perkin Elmer, Hybaid and others.
They are more easily handled than single tubes. They will precisely fit standard well spacing and can also be used with 8- and 12-channel hand-held pipettors. All strips are molded of polypropylene under the most stringent conditions.
Made of polypropylene
PCR Tube Strips .2ml 8 Tubes Per Strip N atural 960/pk, 5pk/cs
Your message has successfully been sent. We will respond back soon
Email entered was invalid.
Name, Email, and your message are all required
On Thursday, May 2nd, we will be implementing a new phone system. During this time our system will be completely down. Please contact us at [email protected] and we will get back to you as soon as possible.
