16 Products found
Result 1- 16 of 16
Multiple Options

Complete the application of a plate-sealing film by pressing with this Sealing Paddle. Assures a secure and uniform seal around all wells. Paddles are recommended for films on raised-rim plates because they fit within the plate rim. Pack of 5.


Multiple Options

Well Orienters

For Easy Pipetting and Identification of Samples in Microplates


Multiple Options

The 4titude TubeMarker™ 2 is designed to directly print text, linear barcodes, 2D codes and graphics on plastic laboratory tubes using patent pending thermal pixel printing technology.

  • Adapters - 
    • P98-791 (4ti-0681) - Tube Adaptor for 1.5/2 mL Tubes
    • P98-793 (4ti-0683) - Tube Adaptor for 2D Cluster Tubes & 0.5 mL Tubes
  • Ribbons - 
    • P98-794 (4ti-0686) - Metallic Blue 300 M x 40 mm Roll
    • P98-796 (4ti-0688) - White 300 M x 40 mm Roll
    • P98-798 (4ti-0689) - Black 300 M x 40 mm Roll
    • P98-799 (4ti-0689-1) - Black Universal 300 M x 40 mm Roll

Download 4titude 0680 Specification Sheet

Download 4titude 0680 Instruction Manual


Multiple Options

Rigid polycarbonate Vari-Plate frames for use with Vari-Strips

These Vari-Plate frames are moulded from rigid polycarbonate for use with our polypropylene Vari-Strips.

The Vari-Strips are inserted into the Vari-Plate frames to form a complete plate, part plate, or individual strip with an easy-to-handle frame.

As the Vari-Strips are interchangeable with the Vari-Plate frames, the frames themselves are re-useable; simply purchase more Vari-Strips to use.



Multiple Options

TLC Reagent Sprayers

TLC Reagent Sprayers deliver a uniform spray mist of visualization reagents for TLC and Paper Chromatography. Spray pattern is adjusted by varying the position of the thumb on the vent hole. TLC reagents or corrosive liquids touch only the nonreactive borosilicate glass atomizing sprayer head and flask. Sprayers feature a head-to-flask connection that consists of a screw-thread ground joint, a connecting cap, and a loosening ring. If reagent crystallization or residue formation causes the joint to freeze, unscrew the cap back onto the ring and the joint will easily come apart. Sprayers operate on as little as 1psi (0.07 kg/cm2), although optimum results are obtained at 3 to 5psi (0.21 to 0.35 kg/cm2). Remove connecting cap, loosening ring and O-ring before autoclaving.


Multiple Options

Kimble Chase TLC Developing Tanks

Develop thin layer chromatography (TLC) plates up to 20 x 20cm in this rectangular TLC Developing Tank. Made from molded glass with clear sides that allow visual inspection or photography. The top edges of the tank are ground flat to match the lids, and beveled to remove sharp edges. The tanks bottom is ground flat to provide a level surface for stability. The inside bottom has a raised ridge that allows the simultaneous development of two 20 x 20cm or four 5 x 20cm plates. Tanks come with one of three lids: standard, nonslip or latched. Nonslip lids have a knob for easy lifting and PTFE retainers inside that prevent the lid from accidentally slipping off. Latch lids have stainless steel latches that hold the lid firmly to the tank, significantly improving the stability of the saturated environment for developing TLC plates. Latch lids also have a knob and the PTFE retainers. The tanks inside dimensions: 9-3/4H x 10-5/8W x 2-7/8D (25 x 27 x 7cm). Weight: 12 lbs (5.4kg).


Multiple Options

The Nunc Amplification Workstation can be used on the bench-top and then easily transported to a thermal cycler or freezer for storage. The tray holds most V-bottom 0.2mL tubes and plates and can be removed from the holder once loaded. After a PCR application, the tray can be returned to the holder and covered with a transparent polystyrene lid for convenient stacking and freezer storage. Withstands temperatures ranging from -4F to 230F (-20C to 110C).


# R19-505

The CoolCaddy™ keeps your reagents and samples cool, on the lab bench, without using crushed ice. Simply store your CoolCaddy overnight in any standard freezer and it’s ready to hold temperature between 2° and 4°C for up to 5 hours. Tubes, plates, strips and multi-channel reservoir solutions can all be kept cool while you perform your experiments.

  • Dimensions - 8.3" x 6.8" x 1.8"
  • Capacities: 
    • 1.5/2.0mL Microtubes: 9 Tubes
    • 2.0mL Cryotubes: 8 Tubes
    • 0.5mL Microtubes: 5 Tubes
    • PCR Plates: 1 Plate
    • PCR Tubes: 96 Tubes or 12 Strips
    • Reservoirs: 1 x 50mL Reservoir (i.e. P8050/P8051)
  • Sold Individually 


# P98-780

96 Pin Pierce Plate

A metal block with 96 aligned pins for piercing every well of a heat or adhesive sealed 96 well plate

This useful tool is a machine-engineered metal block with 96 pins aligned central to each well of a 96 well plate. The pierce plate's 96 pins pierce every well of a heat or adhesive-sealed 96 well PCR or microplate (pierceable seals only).

Enables instant access to samples with a single or multichannel pipette or automated system.


# P98-736

The 4s3 is a semi-automatic heat sealer which is compatible with a wide range of seals and plates of differing designs and heights.

Real Time Display

The rapid heating element allows for a quick start up within minutes. The temperature is displayed in real time so that the heating up process can be monitored.

Energy Saving Functions

When the unit is left idle it automatically switches into standby mode, during which the temperature of the heating element is reduced to 60°C to save energy. When the sealer is left idle for longer periods it switches off automatically for added safety. The times at which the unit switches into standby and switch off modes can be adjusted to suit the user™s needs.

Adapters and Sealing Aids

The 4s3 employs a unique and cost saving adapter system. Deep well plates and most other skirted plates can be sealed on the standard plate carrier (4ti-0615, supplied with the unit). For all 96 well PCR plates an additional plate carrier (4ti-0625, optional extra) must be used. Both plate carriers can also be combined for easier handling of shallow well plates such as 384 well PCR plates.

For better sealing of those films which have a tendency to curl, 4titude® offer sealing aids. A weighted platen (4ti-0602) for use with deep well blocks is provided with the unit and a sealing frame for use with all other plate designs is supplied when ordering the optional 4ti-0625 adapter.

RS-232 Port for Automation Integration

The 4s3 has an RS-232 port to enable it to be integrated into most automated systems.

Plate Formats

The following plate formats can be used with an appropriate holder:

  • SBS standard polypropylene & polystyrene plates & deepwell blocks
  • PCR plates including skirted, semi-skirted and non-skirted formats

 


# C61-992

RNase AWAY, 1L Bottle, 5/cs


# L60-691

Well Orienter Stickers

Permanently label mutliple microplates with clear Well Orienter Stickers. Each well is clearly marked with its corresponding row number and column letter for easy cross-referencing. The paper backing is scored in the middle allowing for easy aligning on the underside of the plate.


# C61-990

RNAse Away, 250ml


# C61-996

DNA Away, Surface Decontaminant, 250ml, 12/cs


# C61-993

RNase AWAY, 4L Bottle, ea, 4/cs