25 Products found
Result 1- 24 of 25
# C91-230

The Enviro-Genie is a Refrigerator, Incubator, Rotator, Rocker, Stirrer for the study of microorganisms and tissue cell growth under strictly controlled conditions of temperature and agitation. Designed to provide the security of precise temperature control and uniformity for demanding incubation/refrigeration applications without taking up a great deal of space.

  • Supplied with magnetic platform
  • One clip plate each for 10–13 mm, 15–17 mm, 28–30 mm tubes
  • Four bag mounting strips
  • Nonskid tray
  • Stackable wire rack


Multiple Options

Cell cultures depend on optimized growth conditions in order to thrive. With precise temperature and CO₂ control, Benchmark’s SureTherm™ Incubators provide the perfect environment for your cultures. All SureTherm™ Incubators feature a proprietary heat distribution system that combines 6-sided heating with a low-speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C).

These are the first and only incubators equipped with (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in “real time”. An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet, or computer.

Cell viewing requires optional IncuView Integrated Microscope Shelf (Item H3565-45-LCI or H3565-180-LCI.)

Features (*Select Styles):

  • Internal Microscope
  • Advanced Monitoring Controls
  • Dual Beam IR Sensor
  • Stackable Design
  • Rounded Stainless Steel Chamber
  • 6-Sided Direct Heating
  • Large Display Monitor
  • *Oxygen Control
  • *High Heat Decontamination
  • Heated Door and Frame
  • *Split Inner Door

 Specifications:

  • Temperature Range: Ambient +5° to 60°C
  • Temperature Accuracy: ±0.1°C
  • Temperature Uniformity: ±0.4°C
  • Temperature Increments: 0.1°C
  • Temperature Stability: 0.1°C
  • CO2 Range: 0 to 20%
  • CO2 Increment: 0.1%
  • CO2 Accuracy: ±0.1°C
  • Co2 Sensor: Dual Beam IR CO2 Sensor
  • Heat Decontamination: Yes (180HD & 180HDO2 Models ONLY)
  • O2 Range: 0.5 to 20% (180HDO2 Model ONLY)
  • O2 Accuracy: ±0.3% (180HDO2 Model ONLY)
  • Chamber Dimensions (45 Liter): 13.2 x 14.2 x 15.4 in. / 33.5 x 36.1 x 39.2 cm
  • Chamber Dimensions (180 Liter): 18.7 x 20.8 x 28 in. / 47.3 x 52.8 x 71 cm
  • Chamber Volume: 45 or 180 Liter
  • Split Inner Door: 6 Compartments (180HDO2 Model ONLY)
  • Chamber Material: Stainless Steel
  • Weight (45 Liter): 77 lbs
  • Weight (180 Liter): 172 lbs
  • Electrical: 120V or 230V 50-60Hz


Multiple Options

Labnet Model 311 and 611 Laboratory Incubators

The Labnet® 311D and 611D high performance incubators are designed for use over a wide temperature range (Ambient +5° to 95°C), allowing general purpose incubation (greater than 65°C) and experiments requiring higher temperatures. Both sizes have digital microprocessor control, the temperature is set and displayed digitally for "set and forget" accuracy and peace of mind. There are no knobs to readjust while the unit is stabilizing. Accurate, convenient and reliable, Labnet® incubators incorporate a long list of user-friendly features.

Inside the stainless steel chamber, you'll find a recessed light source, allowing visual examination of samples through the gasket-ed inner glass door. The light is on only when the outer door is opened. An electrical outlet is provided for operation of optional equipment (rockers, shakers, etc.) inside the heated chamber.

Warm air is evenly distributed from the bottom, the back and both sides of the chamber. Additionally, the outer door is heated, enclosing the entire chamber in a warm air "jacket", eliminating localized hot spots. The heated door also prevents condensation on the glass door. The outer door's magnetic gasket automatically forms an airtight seal. The switchable turbo fan assists the radiant heat distribution system.

All models are supplied with 2 adjustable stainless steel shelves and leveling feet to compensate for uneven bench surfaces.


Multiple Options

211DS Stackable Laboratory Shaking Incubator

Expanded Temperature Range

A small footprint, compact, stackable design and expanded temperature range make the 211DS incubators ideal for molecular biology and general use. Its integral orbital shaker makes it highly versatile.

Stable Temperature Control

Labnet's exclusive SmartChek temperature control system guarantees precise temperature control. Mechanical convection maintains a stable temperature environment and provides quick recovery after opening the door. A safety thermostat is located on the back of the unit. The insulated door has a large, double glass observation panel and opens nearly 180° for easy access. Two full and one half shelf are supplied with each incubator. A flat platform and pre-drilled flask platform (clamps sold separately) are available for the 211DS. Internal electrical outlet allows using small equipment such as GyroMini or Mini LabRoller Rotator inside the chamber of the 211DS.


Multiple Options

The PHMT is actually three instruments in one. It can be used as a microtube thermoshaker, as a bench-top incubator or as a non-thermal simple shaker (suitable for cold room operation). The PHMT has a timer which can be set from one minute to 96 hours and has a resolution of one minute. It utilizes one of two microtube blocks (sold separately) to accommodate three different sizes of tubes. The 12V unit measures just 8W x 9D x 5H, and has a temperature range of ambient +41° to 212°F (+5° to 100°C).


# SI-1400

The incubator-genie allows you to heat, rotate, rock, and shake all in one compact unit. The incubator is best for applications such as Gel & Blot staining, Cell or Bacterial Culture, as well as any application that requires mixing, washing, rocking, and temperature control of a sample. Our unique air circulation system gently and continuously guarantees temperature consistency throughout the entire chamber and mixing process. The unit is compatible with an extensive accessory line-up. Supplied with magnetic platform; one clip plate each for 10–13 mm, 15–17 mm, 28–30 mm tubes; four bag mounting strips; nonskid tray; stackable wire rack.

  • Rotating: 3-35 RPM
  • Rocking: 6-70 Cycles Per Minute
  • Temperature Range: 28°C - 75°C
  • Uniformity: ± 0.5°C
  • Resolution: 1.0°C
  • Stability: ± 0.1°C
  • Alarm: Visible & Audible, Temperature & Time
  • Dimensions: 254 D x 362 W x 260 H (mm)
  • Platform Capacity: 4.5 Kg (10 lbs)
  • Chamber Volume: 24 L (0.86 ft³)
  • Product Weight 19.5 Kg (43 lbs)


# C91-245

Metal clip plate to accommodate up to 4 100-ml Volumetric Flasks. This can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie.


# C91-244

Plastic box with hinged lid holds up to (100) 1.5ml or 2.0ml microtubes. A maximum of 4 boxes, 2 per side, can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie or Incubator-Genie. A maximum of 8 boxes, 4 per side can be attached to the Magnetic Platform for use with the Rotator Genie.


# C91-243

Pack of 2 clip plates with two elastic bands each for use with odd-shapped sample vessels. This can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie.


# C91-242

Serial Cable may be used to connect the Enviro-Genie to a computer via a serial port for data capture or programming. It is a standard 9-pin, female to female straight through serial cable.


# C91-241

Stackable Wire Rack may be used in the Enviro-Genie and the Incubator-Genie to increase shelf space for use as a temperature controlled chamber. This is included in the Enviro-Genie and the Incubator-Genie. Two wire racks will fit inside the chamber to provide 3 levels for containers


# C91-239

Two stainless steel Trays and 24 magnetic Bag Mounting Strips used to attach sealed bags to the Magnetic Platform (Part No. 0A-1100-030) for use with the Roto-Shake Genie,Enviro-Genie or Incubator-Genie for increased bag capacity.


# C91-238

This pack of 16 stainless steel bag mounting strips is used to attach the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie. Four Bag Mounting Strips are included in the Roto-Shake Genie, Enviro-Genie and the Incubator-Genie.


# C91-237

This pack of 6 metal clip plates will accommodate up to 3 tubes with a diameter of 28-30mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie or Incubator-Genie. A maximum of 12 clip plates, 6 per side, may be attached to the Magnetic Platform for use with the Rotator Genie.


# C91-236

One metal clip plate to accommodate up to 3 tubes with a diameter of 28-30mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie or Incubator-Genie. This attachment is included in the Roto-Shake Genie, Enviro-Genie and the Incubator-Genie. A maximum of 12 clip plates, 6 per side, may be attached to the Magnetic Platform for use with the Rotator Genie.


# C91-235

Pack of 6 metal clip plates to accommodate up to 6 tubes with a diameter of 15-17mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie or Incubator-Genie. 


# C91-234

One metal clip plate to accommodate up to 6 tubes with a diameter of 15-17mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie or Incubator-Genie. This attachment is included in the Roto-Shake Genie, Enviro-Genie and the Incubator-Genie. A maximum of 12 clip plates, 6 per side, may be attached to the Magnetic Platform for use with the Rotator Genie.


# C91-232

One metal clip plate to accommodate up to 12 tubes with a diameter of 10-13mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie or Incubator-Genie. This attachment is included in the Roto-Shake Genie, Enviro-Genie and the Incubator-Genie. A maximum of 12 clip plates, 6 per side, may be attached to the Magnetic Platform for use with the Rotator Genie.


# 133000

The Boekel Scientific Economy Small gravity convection digital incubator is perfect for incubating cultures, test kits, and many other research and medical procedures that require heating at an economy price. Includes two shelves and accommodates up to four shelves. Digital temperature readout with control dial. Solid door style only. Great for lab benchtop's with limited space.

  • LCD temperature display
  • Analog Dial Control
  • Heating pilot light indicates when heater is on
  • Small footprint
  • Magnetic latch 
  • 115 Volt model
  • Includes 2 shelves


# I25-300

Incubator Digital 2.5 cu ft, 2 shelf, see thru door, 115V


# I20-241

  • Digital temperature control
  • Personal sized, 13 x 14.5″ footprint (20 L)
  • Accepts bottles and flasks up to 2 L

With digital temperature control, the MyTemp incubators provide convenient “set and walk away” operation, eliminating the need for external thermometers and repetitive “fine tuning” of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up or cool down while accurately monitoring the chamber temperature and conveniently displaying the temperature in real time on the large LED control panel.

Despite a modest footprint of 14.5 x 13″, the MyTemp incubators feature large internal chambers, capable of storing flasks and bottles up to 2 Liters. In addition, the incubators include two adjustable shelves and an internal outlet for powering small shakers, rockers and other instrumentation. A mini nutating rocker (supplied with both flat and dimpled mats) is available for agitation of samples during incubation.

Specifications:

  • Temperature Range: 15°C below ambient to 60°C*
  • Temperature Accuracy: 0.5°C (at 37°C)
  • Temperature Uniformity: ± 1.5°C (at 37°C)
  • Temperature Increments: 1°C
  • Dimensions (W x D x H): 13.2 x 14.5 x 18.7 in / 33.5 x 37 x 47.5 cm
  • Exterior: 10.3 x 9.3 x 12.8 in / 26 x 23.5 x 32.5 cm
  • Interior: 9.5 x 11.5 in / 23.5 x 29 cm
  • Capacity: 20L (0.75 ft³)
  • Weight: 15 lbs / 6.5 kg
  • Warranty: 2 Years
  • Electrical: 100 to 240V 50-60Hz
* Minimum temperature is approx. 10°C in 25°C room temp.


# I20-240

  • Digital temperature control
  • Personal sized, 13 x 14.5″ footprint (20 L)
  • Accepts bottles and flasks up to 2 L

With digital temperature control, the MyTemp incubators provide convenient “set and walk away” operation, eliminating the need for external thermometers and repetitive “fine tuning” of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up while accurately monitoring the chamber temperature and conveniently displaying the temperature in real time on the large LED control panel.

Despite a modest footprint of 14.5 x 13″, the MyTemp incubators feature large internal chambers, capable of storing flasks and bottles up to 2 Liters. In addition, the incubators include two adjustable shelves and an internal outlet for powering small shakers, rockers and other instrumentation. A mini nutating rocker (supplied with both flat and dimpled mats) is available for agitation of samples during incubation.

Specifications:

  • Temperature Range: 5° above ambient to 60°C
  • Temperature Accuracy: 0.5°C (at 37°C)
  • Temperature Uniformity: ± 1.5°C (at 37°C)
  • Temperature Increments: 1°C
  • Dimensions (W x D x H): 13.2 x 14.5 x 18.7 in / 33.5 x 37 x 47.5 cm
  • Exterior: 10.3 x 9.3 x 12.8 in / 26 x 23.5 x 32.5 cm
  • Interior: 9.5 x 11.5 in / 23.5 x 29 cm
  • Capacity: 20L (0.75 ft³)
  • Weight: 15 lbs / 6.5 kg
  • Warranty: 2 Years
  • Electrical: 100 to 240V 50-60Hz


# C91-240

Pack of 2 metal clip plates to accommodate one 35mm ID Hybridization Tube up to 300mm in length. This can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie.


# C91-233

Pack of 6 metal clip plates to accommodate up to 12 tubes with a diameter of 10-13mm. A maximum of 8 clip plates, 4 per side, may be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie, or Incubator Genie. A maximum of 12 clip plates, 6 per side, may be attached to the Magnetic Platform for use with the Rotator Genie.