39 Products found
Result 1- 24 of 39
Multiple Options

  • Type 1, Class E
  • Full Brim
  • Polyethylene shell provides superior impact protection
  • 4-Point Pin-Lock Suspension
  • Non-Vented
  • Side Slots designed to work with MSA accessories
  • Standard (6-1/2” to 8”)
  • Approvals: ANSI Z89.1-2014, CSA Z94.1-2015


Multiple Options

  • Type 1, Class E
  • Full Brim
  • Polyethylene shell provides superior impact protection
  • 4-Point Ratchet Suspension
  • Side Slots designed to work with MSA accessories
  • Standard (6-1/2” to 8”)
  • Approvals: ANSI Z89.1-2014, CSA Z94.1-2015


Multiple Options

  • Polyethylene shell provides superior impact protection
  • Self-adjusting crown straps ensure a comfortable fit
  • Slots designed to work with MSA accessories to help ensure compliance with both the helmet and the accessory
  • Standard (6-1/2” to 8”)
  • Approvals: ANSI Z89.1-2014, CSA Z94.1-2015


Multiple Options

  • Size: Universal
  • Low profile design
  • Tested and marked for reverse donning
  • Shell constructed from High Density Polyethylene materials
  • Rain trough on sides and back of helmet channel moisture away
  • Soft brow pad is replaceable. Replaceable suspensions and headbands also available
  • Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hat
  • Universal accessory slots fit cap mounted ear muffs and accessories. Hats also accommodate chin straps
  • Testing: Impact, Penetration, Flammability, Electrical Insulation, Marking & Humidity
  • Standards: ANSI/ISEA Z89.1, Type 1, Class C, G and E
  • Sold Individually


Multiple Options

  • Size: Universal
  • Low profile design
  • Tested and marked for reverse donning
  • Shell constructed from High Density Polyethylene materials
  • Rain trough on sides and back of helmet channel moisture away
  • Soft brow pad is replaceable. Replaceable suspensions and headbands also available
  • Snap Lock suspension features "tuck away" adjustments for all-day, hassle-free wear
  • Universal accessory slots fit cap mounted ear muffs and accessories. Hats also accommodate chin straps
  • Testing: Impact, Penetration, Flammability, Electrical Insulation, Marking & Humidity
  • Standards: ANSI/ISEA Z89.1, Type 1, Class C, G and E
  • Sold Individually


Multiple Options

  • Size: Universal
  • ABS material — Strong, yet ultra-light for seemingly weightless protection
  • Low profile design — Offers a low center of gravity for better balance
  • Rear padded suspension — Provides additional level of comfort on the wearers’ neck
  • 4-position harness points — Allows you to move the harness forward, backward, up or down – allowing for the most optimal position for ultimate comfort
  • Replaceable sweat band — Padded fabric and polyurethane foam for all day wear
  • Vented pressure pad — Keeps the straps in place providing an additional level of comfort
  • Easy to grasp knob — Adjusts the suspension from 6 1/2 to 8
  • Swinging hinge points — Allows you to find the most comfortable position on the back of your head
  • Standards: ANSI/ISEA Z89.1-2014


Multiple Options

  • Size: Universal
  • ABS material — Strong, yet ultra-light for seemingly weightless protection
  • Low profile design — Offers a low center of gravity for better balance
  • Rear padded suspension — Provides additional level of comfort on the wearers’ neck
  • 4-position harness points — Allows you to move the harness forward, backward, up or down – allowing for the most optimal position for ultimate comfort
  • Replaceable sweat band — Padded fabric and polyurethane foam for all day wear
  • Vented pressure pad — Keeps the straps in place providing an additional level of comfort
  • Easy to grasp knob — Adjusts the suspension from 6 1/2 to 8
  • Swinging hinge points — Allows you to find the most comfortable position on the back of your head
  • Standards: ANSI/ISEA Z89.1-2014


Multiple Options

  • Size – Universal
  • Colors – White, Yellow, Orange, Red and Blue
  • ANSI Class – Non-ANSI
  • Material – High Density Polypropylene
  • Vented Bump Cap
  • 4-Point Plastic Suspension with Pin Lock
  • Low-Risk Environments Only
  • Made in the USA
  • Sold Individually


Multiple Options

  • Size – Universal
  • Material – Polyethylene
  • Dimensions – 5.75" H x 11" L x 9" W
  • Headband Sizes – 6.5 – 8"
  • Weight – 12.7 oz
  • Accessory Slots – Yes
  • Reverse Donning – Yes
  • Rain Trough – On Sides and Back
  • 4-Point Ratchet Suspension
  • Snap Lock Suspension
  • Meets – ANSI Z89.1 Type 1 Class C, G & E


Multiple Options

  • Size – Universal
  • Colors – White, Black, Gray, Brown, Red, Yellow, Green, Orange and Blue
  • Material – High Density Polyethylene
  • Weight – 215 gm
  • Shell Thickness – 1.35 – 2.15 mm
  • Suspension Adjusting Sizing – 6.5 – 8
  • Suspension – 4-Point Glide Lock Suspension
  • Standards – Not-Rated


Multiple Options

  • Type 1, Class E
  • Polyethylene shell provides superior impact protection
  • 4-Point Pinlock Suspension
  • Side Slots designed to work with MSA accessories
  • Standard (6-1/2” to 8”)
  • Approvals: ANSI Z89.1-2014, CSA Z94.1-2015


# 5008-RACK

  • Ensure hard hat use by keeping equipment handy with this rack.
  • Ideal for cubicles, offices, labs, quality control departments or construction trailers
  • Protect hard hats from damage or abuse due to careless storage
  • Secure-Mount foam tape easily attaches rack to any flat ledge
  • Holds up to 20 lbs when attached with foam tape.  Also features a hole for screw mounting (screw not included)
  • Second hook holds purses or coats in office cubicles
  • Heavy duty steel construction. Also epoxy coated for years of use
  • Weight: 2 lbs.
  • Product Dimensions: 18.75″H x 3″W x 6.5″D (2.75″ front Hook Depth, doors up to 1.75″ thick)
  • Sold individually – Accessories shown not included


# 5003

  • For safe storage of hard hats and bump caps in offices, Labs, quality control departments or construction trailers
  • Rack allows easy compliance keeping head protection easily in reach
  • Magnets securely hold onto any flat metal surfaces including desks, filing cabinets or cubical parts
  • Fits most hard hats including wide brim and cowboy hat styles
  • Heavy duty steel construction. Also epoxy coated for years of use
  • Weight: 2 lbs.
  • Product Dimensions: 3 x 3 x 4”
  • Sold individually – Accessories shown not included


# 5002

  • Hard hat rack slides over a seat in most passenger vehicles or pickup trucks
  • Keeps your hard hat close while out of the way
  • Weight: 2 lbs.
  • Product Dimensions: 3 x 8 x 6”
  • Sold individually – Accessories shown not included


# 5001

  • Hang hard hats where needed in your vehicle, office, or factory
  • Secure-mount foam mounting tape included
  • Rack mount has holes for screws
  • Item Weight: 2 lbs.
  • Item Dimensions: 3 x 3 x 4”
  • Sold individually – Accessories shown not included


# 3002812

Kimberly Clark 3002812 F60 Mesh Black Steel Screen, 15.5"x9"


# 2580508

Bump Cap, White, 4-Point Glide Lock Susp ension


# HP26160

Blue Full Brim Hard Hat 6 Point Ratchet


# HP26140

Orange Full Brim Hard Hat 6 Pt. Ratchet


# HP26130

Yellow Full Brim Hard Hat 6 Pt. Ratchet


# HP261

Ratchet Suspension for Full Brim Hard Ha t, 6 Point


# HP24141

Hard Hat Hi Viz Orange, Full Brim, Ratch et Suspension


# HP24131

Hard Hat Hi Viz Lime, Full Brim, Ratch et Suspension


# HP161

6pt Ratchet Suspension insert