22 Products found
Result 1- 22 of 22
Multiple Options

  • Application: Eye/face wash for wall mounting. Two large FS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes and face.
  • Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
  • Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.
  • Bowl: 11-1/8" diameter stainless steel.
  • Mounting: Heavy duty cast aluminum wall bracket with corrosion resistant powder coated finish.
  • Supply: 1/2" NPT female inlet.
  • Waste: 1-1/4" NPT female outlet.
  • Sign: ANSI-compliant identification sign.
  • Quality Assurance: Unit is completely assembled and water tested prior to shipment.


Multiple Options

This patented system delivers purified, contaminate-free Eyesaline® solution from factory sealed cartridges. Features a constant stream, proper fluid height and fifteen minute flushing period as required by the ANSI-2004. Reservoir captures contaminated run-off. Includes wall mount bracket. Unit and cartridges sold separately.


Dimensions: 30¯ H x 29¯ W x 22.5¯ D, Weight: 40 lbs
Fluid Cartridges: Safety Sealed, 3.75 gallons, Weight: 68 lbs


Multiple Options

SterileEyesaline® Solution helps to flush away dust and foreign particles. Twist-off cap is sterile, fast and easy.

TheWall Station mounts easily in any work area. Features include: a 32 Oz. Eyesaline® solution with a twist-off top and extended flow nozzle. Shipped with two-sided tape and mounting screws.


Multiple Options

Remove the easy-to-locate nozzle strap to activate flushing. Fifteen minutes of hands-free stream.

Station includes: Eyesaline® solution and an emergency eyewash sign. Constructed of tough, FDA approved, high impact polyethylene. Lockable fill-top cap reduces risk of tampering.


Multiple Options

Save workers from eye emergencies. Flush out dust or small particles. This wall mounted station contains one- or two- 16 oz. bottles of the highest quality, sterile, buffered eye irrigate. Refill bottles are sold individually, or 12 per case.


Multiple Options

The stainless steel Cabinet-Mounted Station fits unobtrusively flush with a wall. The flow begins immediately when the swing arm is pulled down 90°, opening the 1/2¯ IPS stay-open valve. The unit has chrome-plated brass pipes and fittings. It is designed to mount between standard 16¯ wall studs and utilizes a 1/2¯ IPS water supply.Eyewash Stations feature soft-flow eyewash heads with protective covers and a flow control which ensures steady water supply between 30psi and 90psi.Eye/Face Wash Stations have large perforated sprayheads which bathe the eyes and the face. The slightly largerBarrier-Free models are designed to comply with all ADA (Americans with Disabilities Act) guidelines regarding reaches, clearances and operating procedures. All models meet ANSI Z358.1-2004 standards.


Multiple Options

No description


Multiple Options

No description


Multiple Options

No description


Multiple Options

Swing-Activated Eye and Eye/Face Washes mount to a counter or a wall next to a sink. TheSwing-Over unit rotates horizontally and is counter mounted only. TheSwing-Down unit swings vertically and is also counter mounted. A 90° swivel activates eyewash over the sink and begins the flow of water used to cleanse the eyes. Spent water drains into the sink. The space-saving station stows neatly to the side of the sink when not in use. Features twin spray heads which include a flow control and pop-off dust covers. All units include a safety sign and inspection tag. Water supply: 1/2¯ IPS (female). Meets ANSI Z358.1-2004 Standards. SEI Certified.


Multiple Options

The Eyewash Bottle Wall Rack holds one 32-oz (1000mL) emergency eyewash bottle. It is constructed of welded steel wire with a durable corrosionproof epoxy coating. The Wall Rack can be hung on a single nail or screw in areas where the need for emergency eyewash may arise. Measures 4-1/4Dia. x 8-1/4¯H (108 x 210mm). Eyewash bottle not included.


Multiple Options

Emergency eyewash solution doesn™t get any more accessible than with the Pocket-Sized Emergency Eyewash Bottle. The handy polyethylene bottle holds 4 oz (120mL) of eyewash solution or water and can be kept in a pocket or a convenient Vikem® vinyl belt pouch. The oval bottle features an eyecup with a snap-on cover. Instructions for proper use are printed on the bottle.


Multiple Options

The Scienceware Emergency Eyewash Station has an upgraded fluid delivery system which allows for solution to reach the eye whether the victim is standing, sitting or lying down. The unit can be easily mounted in any area where emergencies requiring instant access to eyewash are more likely to happen. Easy-to-read instructions and graphics on the mounting board and eyewash bottle guide the user through correct eyewash procedures. Station includes mounting board and empty eyewash bottle.


# 16GFEW

This portable, self-contained 16-gallon gravity-fed eye wash station is suitable wherever continuous water isn’t available—no plumbing needed. The gravity-fed eye wash supplies a continuous, controlled flow that exceeds the ANSI Z358.1 standard of 1.5 LPM (0.4 GPM) for 15 minutes, providing a reliable safety solution no matter where you are located. Carrying handles and concealed mounting bracket make moving and relocating easy. High-visibility color is easy to identify in emergency situations.

  • Easy to transport to areas where a continuous supply of water is unavailable
  • Simple to operate using the pull down manifold on the front of the unit
  • Wide opening for ease of filling
  • Built to last with high density polyethylene body and manifold.
  • Meets the requirements of ANSI standards

Specifications:

  • Material: Polyethylene
  • Capacity: 16 US Gallon (60 L)
  • Flow Rate: 1.5 LPM
  • Operation Duration: 15 minutes
  • Color: Green
  • Dimensions: 638mm (25.12 in) x 540mm (21.26 in) x 287mm (11.3 in)
  • Weight: 19.8 lb. Empty


# ADDR4PKUS

Eyewash additive preserves water in portable, self-contained eyewash stations to prevent bacterial growth. The treated water helps avoid additional damage to an already injured eye, while also extending the useful life of eyewash water.  Simply fill a clean eyewash station with potable water and add the additive solution.  Each 8 oz bottle preserves from 5-20 gallons of water and maintains water quality for up to 120 days.  Treated water reduces the frequency of water changes, minimizing the maintenance required to stay compliant (ANSI Z358.1-2014, Section 5.5.3 recommends weekly visual checks for flushing fluid).  Tamper-evident seal offers extra security.  Sold in packs of 4, 8-oz bottles.

  • Reduce maintenance – preserved water lasts up to 120 days before needing to change.
  • One bottle preserves up to 20 gallons of water
  • Use with Hughes 16GFEW, 15GEW, 28GEW and 38GEW and other portable or self-contained eyewashes
  • Sealed bottle has a shelf life of 3 years
  • 4 – 8 oz. bottles with FDA compliant label


# 10GFEW

In locations where a continuous supply of potable water is unavailable, this wall mounted eye/face wash unit offers the solution to keep your workforce safe. The slimline 38 litre tank delivers a controlled flow of a minimum 1.5 liters per minute of water for 15 minutes, meeting ANSI Z358.1-2014 requirements. Suitable for indoor use and with the addition of optional insulated or heated jackets, can also be installed outdoors.

  • Delivery manifold drains unused water away reducing the risk of stagnating water becoming trapped
  • High visibility orange unit incorporates handles to aid installation
  • Wide opening for ease of filling
  • Meets the requirements of ANSI standards
  • Delivery manifold drains unused water away reducing the risk of stagnating water becoming trapped
  • Wall mounting bracket included
  •  Water preservative additive available to eliminate bacteria

Specifications:

  • Material: Polyethylene
  • Capacity: 10 US Gallon (38 L)
  • Flow Rate: 1.5 LPM
  • Operation Duration: 15 minutes
  • Color: Orange
  • Dimensions: 450mm (18in) x 186mm (7.3in) x 774mm (30in)
  • Weight: 5.8 lb. Empty


# G6020

  • Application: Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 13 gallons (49 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency eyewash, eye/face wash or drench hose unit. Depending on water supply size and pressure, valve can supply multiple units.
  • Mounting: Valve inlets can be positioned on top, back or bottom of valve. Outlet can be on top or bottom. Valve can be configured in the field for any mounting position. Furnished with heavy duty stainless steel mounting bracket.
  • Temperature Control: Valve has precision thermal actuator that senses incoming water temperature and automatically blends water to preset temperature. Valve is factory set to deliver 85°F (29°C) water. Temperature of tepid water can be adjusted as required and then locked. Furnished with dial temperature gauge as standard to monitor temperature of tepid water.
  • Cold Water Bypass: If the supply of hot water is restricted or interrupted, an internal bypass allows the valve to deliver cold water only. In bypass mode, the valve delivers 9 GPM (34 L/min) at 30 PSI (2.1 bar) pressure drop.
  • Hot Water Shutoff: Valve has internal PTFE valve seat. If the supply of cold water is interrupted, the valve will close completely and not deliver any water at all, eliminating any possibility of scalding.
  • Flow Capacity: Refer to table below for flow capacity of valve at specified pressure drops.
  • Checkstops/Filters: Each inlet has a lockable shutoff valve for maintenance, internal check valve to prevent backflow and stainless steel basket filter to remove debris from the water flow.
  • Construction: Valve meets the requirements of the U.S. Safe Drinking Water Act as lead-free.
  • Inlet/Outlet: 1/2” NPT female inlets and outlet as standard.
  • Quality Assurance: Valve is ASSE certified under ANSI/ASSE 1071. Valve is fully assembled and factory tested prior to shipment.

WATER PRESSURE/TEMPERATURE REQUIREMENTS

  • Supply Pressure: Maximum incoming water pressure is 125 PSI (8.6 bar). Pressure of hot and cold water supplies can vary up to 25% and still deliver the flow and temperature required by ANSI/ASSE 1071.
  • Hot Water Supply Temperature: Incoming hot water temperature range is 120° - 180°F (49° - 82°C). Guardian recommends that the hot water temperature not exceed 140°F (60°C).
  • Cold Water Supply Temperature: Incoming cold water temperature range is 40° - 70°F (4° - 21°C). Cold water temperature must be at least 10°F (5.6°C) less than the temperature of the delivered tepid water.
  • Tepid Water Temperature: Temperature of tepid water is adjustable within a range of 65° - 95°F (18° - 35°C) and then locks in position. High temperature limit stop is set at 90°F (32°C) to prevent misadjustment.


# 2132109

8 oz. bottle of bacteriostatic additive to protect against growth of bacteria and other impurities in portable unit. (Case of 4)


# 2131066

Honeywell 460 16 Oz Single Eyesaline Wall Eye Wash Station


# 2131015

SAS GRAVITY FED PORTABLE EYEWASH STATION


# AQ120

  • The sealed ready to use cartridges ensure safe, pure, contaminant-free flushing fluid for 2 years.
  • The self-evacuating cartridges store the fluid and help maintain a required flow throughout the entire 15-minute flush without any external force.
  • The actuation is a simple, one-step process—just pull the tray down in an easy motion and the fluid begins to flow in less than a second.
  • Sealed Fluid Cartridges
  • Preserved Saline Solution
  • 3.7 Gal (14 L) per cartridge
  • 70lbs (31.75 kg)


# AQ100

Encon's Aquarion® Self-Contained Eyewash offers a sleek, slim design and an innovative mounting method for use on any wall, tight hallway, column, shelf or cart. Installation to these or almost any other structural support is fast and simple, requiring only one person.

The Aquarion® offers the first sealed flexible cartridge that completely self-evacuates without external forces applied, providing reliable performance when you need it most. It's the ultimate choice in eyewash stations when plumbed, potable water is not available.

Cover

Yellow ABS for protection of fluid bags and internal cavity of station; Side windows for visual inspection of the fluid bags without removal of the cover.

Back Plate

Polycarbonate to support the eyewash station with filled cartridges; Mounting slots spaced to screw to wall studs between 12 and 20 inches apart, a solid bearing frame or by using a retaining strap through molded slots around a support behind the plate formed to fit a 4 to 8 inch wide beam.

Tray & Nozzles

Retracting tray to protect the nozzles from the environment; Single pull down motion pierces seals in the hoses allowing the fluid to flow immediately from the attached nozzles; Collects spent fluid and directs it to an integral drain port for future disposal; Usage indicator tie breaks upon actuation showing that the unit has been used.  Tray stop prevents easy repositioning of tray without service being performed.  Enclosed ABS plastic heads connect to retracting tray; non-injurious, dual stream, of water at 0.4 gpm (1.5 lpm).

Base

Black ABS base slides onto the back plate positioned and held through four retaining hooks, fastened with supplied self-threading bolts if desired; Base provides structure to the station and holds the nozzle tray in an upright, ready to use position.

Fluid Bags

Self-evacuating flexible bags keep the flushing fluid fresh and clean for reliable performance and maintenance free service; Two hand slots allow for easy handling and mounting in the station by one person.  BAGS ARE SOLD SEPARATELY WHEN ORDERING THE AQ100.