Free Shipping on Orders Over $149 For a Limited Time! *Restrictions apply
RadTape™s phosphorescent adhesive labels may be cut to any size or shape the user wishes, for each individual membrane, dried gel or microarray. An ordinary pen may be used to mark the label using the investigator™s own codes and symbols. The custom label is then affixed to the membrane, gel or microarray. Once placed against film, RadTape exposes a negative image of the markings directly onto the autorad, producing a permanent record of the experiment. Choose RadTape Plus for a heavy-duty, waterproof alternative to RadTape.
A Clear Adhesive Overwrap to Protect Writing
Easy Application Comes in a handy dispenser and is perforated to fit 0.5ml and 1.5ml tubes. Multi-Surface Adhere to all plastics, glass and metals. Temperature Range - -196 C to 150 C
Permanently engrave messages, instructions, sample information, or any text on these aluminum tags. Write on them with an ordinary ballpoint pen. These tags feature a "soft center" for inscribing both sides. Handy size of 3-1/8 x 1-3/8" (7.9 x 3.5cm) makes them ideal for tagging valves, tubing, samples, and cylinders. Supplied 48 tags and wires per pack.
Bake Tags are oven-safe marking labels that withstand conventional oven-sterilization (typically 180°C) or heating to inactivate RNase, DNase and other enzymes. Bake Tags will withstand autoclaving, cryogenic freezer storage conditions and boiling baths without peeling or falling off.
Used to identify and accurately size photographic subjects, these labels feature removable adhesive that holds the label firmly in place and leaves no residue upon removal.
Rugged Laboratory Labels help organize vials, tubes, bottles and well plates. Several sizes and label stocks (other than those shown) are available. Contact customer service for a complete listing of labels.
F- Freezer Environment, N - Liquid Nitrogen Environment, A - Autoclave Environment, H - Hot Water (100°C) Baths, L - Low Profile (Thin).
**Self-Laminating
This Printer Ribbon is compatible with TLS2200® and TLS PC Link thermal transfer printers.Series R4310 Ribbon is recommended for a wide range of label stock including polyolefin, vinyl cloth, paper, polyimide, polyester, DuPont® Tedlar®, and nylon cloth.Series R4410 Ribbon andSeries R6010 are UL and CSA approved for a variety of polyester labels and some polyimide and vinyl labels.Series R6210 Ribbon can be used on a select amount of polyolefin, vinyl and polypropylene labels. Contact customer service to determine detailed ribbon and label compatibility.
"Grips" to wet, frost-covered and frozen surfaces. For use in most laser printers.
Nalgene™ Polyolefin Right-To-Know Custom Labeling System
Resin Ribbon 2.50"x244' for TLP 2844
Direct Thermal Cryo-Tags® are formatted to easily work with the Dymo® Labelwriter®, but also work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both!
Direct Thermal Cryo-Tags® are formatted to easily work with the Dymo® Labelwriter®, but also work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both!
Direct Thermal Cryo-Tags® are formatted to easily work with the Dymo® Labelwriter®, but also work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both!
Direct Thermal Cryo-Tags® are formatted to easily work with the Dymo® Labelwriter®, but also work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both!
Direct Thermal Cryo-Tags® are formatted to easily work with the Dymo® Labelwriter®, but also work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both!
Direct Thermal Cryo-Tags® are formatted to easily work with the Dymo® Labelwriter®, but also work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both!
Your message has successfully been sent. We will respond back soon
Email entered was invalid.
Name, Email, and your message are all required
On Thursday, May 2nd, we will be implementing a new phone system. During this time our system will be completely down. Please contact us at info@labsource.com and we will get back to you as soon as possible.
