The BeadBath Duo series are the first laboratory baths designed for precision temperature control when used with water, or with Lab Armor® thermal beads. Unlike any other laboratory bath, they feature a “MODE” button that can be used to toggle between “Bead” or “Water” mode. Choosing the correct mode will automatically adjust the operation and balance of the multiple internal heating and sensing elements to ensure optimal performance. The result is one combination bath that is suitable for accurate, and uniform temperature control in either condition.
While most research laboratories today are using water baths, many prefer the convenience of bead baths due to the advantages listed below. With the BeadBath Duo, the lab gets the best of both worlds, allowing conversion from one bath type to the other, with the simple press of a button.
Benchmark’s new IsoBlock dry bath is ideal for incubation of samples at two different temperatures, in a single compact unit. The two chambers are separated by an insulated wall and are controlled independently, allowing IsoBlock to serve as two dry baths in one. The hinged (and removable) lid is also designed with a dividing wall. When closed, this dividing wall acts as a barrier, preventing air transfer between chambers.
The control panel features large digital displays of both time and temperature. Both settings of a block can be adjusted at any point, without affecting the settings of the other block. The timer function is non-mandatory; IsoBlock can be used for continuous heating.
Various blocks are available for accommodating nearly all popular tube sizes. In addition, the unique Quick-Flip™ universal blocks accept tubes from 0.5 to 2.0ml and, with just a quick flip to the other side, they also accommodate 0.2ml tubes or PCR strips.
| Temperature Range: | Ambient +5° to 105°C | |
| Temperature Accuracy: | +0.3°C | |
| Temperature Uniformity: | ± 0.2°C | |
| Temperature Increments: | 0.1°C | |
| Timer: | Off or 1 min. to 99 hr 59 min. | |
| Dimensions: | 6.3 x 145 x 5 in. / 16 x 36.5 x 13 cm | |
| Weight: | 10 lbs / 4.5kg 8 lbs / 4kg | |
| Warranty: | 2 years | |
| Electrical: | 120V or 230V 50-60Hz |
Remove grease, dust and other contaminants from the surfaces and cavities of small objects, parts and samples with the Mini Ultrasonic Cleaner. Very easy to use. Just put the objects to be cleaned into the stainless steel tank, or into the dipping basket (included), and then into the tank. Replace the transparent lid and turn the unit on. A ceramic chip generates thousands of tiny cleansing bubbles that vibrate at very high frequencies. When the vibration speed rises above ultrasonic frequencies, these minute bubbles explode, creating a powerful cleaning force that cleans not only the surface of an object, but the small hard-to-clean cavities of that object as well. The Mini Ultrasonic Cleaner cleans in three minutes, then shuts itself off. And unlike many chemical or abrasive cleaners, ultrasonic cleaning will not scratch or damage delicate objects. Ideal for cuvettes, lenses, glassware, stainless steel instruments, metals and more. Tank dimensions: 6.6 x 3.5 x 2¯ (168 x 89 x 53mm). Tank capacity: 20.3 oz (600mL). Weight: 32 oz (900g). Power: 100/110VAC. Five-year manufacturer™s warranty.
The 14 Liter Boekel Scientific "Hot Tub", Medium Size Laboratory Water Bath can be used as a standard water bath or as a boiling water bath. User simply sets temperature into “boiling mode”. The unit has digitally controlled temperature with a built-in timer. The temperature control is extremely accurate due to a three point factory calibration and PID controller.
The Six Liter Boekel Scientific "Hot Tub", Small Size Laboratory Water Bath can be used as a standard water bath or as a boiling water bath. User simply sets temperature into “boiling mode”. The unit has digitally controlled temperature with a built-in timer. The temperature control is extremely accurate due to a three point factory calibration and PID controller.
The myBath series is designed to guarantee superior accuracy and performance in a compact footprint. With four sizes to choose from, there is a myBath to fit every lab.
The 12L model includes easy to use controls allowing the user to digitaly select and monitor settings. Adjustable in 0.1ºC* increments, the temperature is shown on a large, 3-digit display*. The proprietary Quik-CAL™ feature allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch.
All myBath models feature seamless, stainless steel chambers for easy cleaning and long life The chambers resist rust and have no corners to collect dirt or contamination. The larger 12L units have drains for hassle-free water changes. The 12L models include a see-through cover that can be removed, or flipped back on a rear hinge to conserve bench space. The lid’s gabled design will divert condensation to the front and back of the bath, away from samples.
Racks are available to accommodate 1.5/2.0ml, 15ml and 50 ml tubes within the 12L baths.
The myBath series is designed to guarantee superior accuracy and performance in a compact footprint. With four sizes to choose from, there is a myBath to fit every lab.
Adjustable in 0.1ºC increments, the temperature is shown on a large, 2-digit display. The proprietary Quik-CAL™ feature allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch.
All myBath models feature seamless, stainless steel chambers for easy cleaning and long life The chambers resist rust and have no corners to collect dirt or contamination. The lid’s gabled design will divert condensation to the front and back of the bath, away from samples.
myBath 2L, has a 2-digit display and can be controlled in increments of 1.0C.
The 28 Liter Boekel Scientific "Hot Tub", Large Size Laboratory Water Bath can be used as a standard water bath or as a boiling water bath. User simply sets temperature into “boiling mode”. The unit has digitally controlled temperature with a built-in timer. The temperature control is extremely accurate due to a three point factory calibration and PID controller.
Your message has successfully been sent. We will respond back soon
Email entered was invalid.
Name, Email, and your message are all required
On Thursday, May 2nd, we will be implementing a new phone system. During this time our system will be completely down. Please contact us at info@labsource.com and we will get back to you as soon as possible.
