The Sartorius Minisart Syringe Filter is an ideal choice for all aqueous solutions and oils with a pH of 4-8.  This filter has a pore size of 5um and can be used for particle, rubber grit and cell removal.  Individually packed and sterilized by Ethylene Oxide.  Non-Sterile, can be sterilized by gamma irradiation or EO. 

• Bulk packed
• Glueable
• Low non-specific binding
• Bidirectional use possible

Specifications:

• Application: Clarification and particle removal of aqueous solutions such as media, buffers and sera.
• Connections (Physical): Connector Inlet – Female Luer Lock; Connector Outlet – Male Luer Lock
• Dimensions: Filter Dimeter: 28mm; Filtration Area: 6.2 cm2
• Features: High Flow: No
• Filter Paper/Membrane Color: Brown
• Flow Rate: Greater than or equal to 600mL/min for water at 1 bar (14.5 psi)
• Total Throughput: Up to 200mL
• pH Range: 4.0-8.0
• Construction Materials: Housing-Methacrylate butadiene styrene (MBS); Membrane-Cellulose Acetate (CA)
• Maximum Allowable Working Temp: 60 degrees C (140F)
• Maximum Operating Pressure: 4.5 bar (65 psi)
• Bubble Point: ≥ 0.7 bar (10 psi) with water
• Burst Pressure: ≥ 7.0 bar (102 psi)
• Pore Size: 5um
• Wettability: Hydrophilic
• Hold-up Volume: ≤ 100 – 150 µL
• 50/Pack, Bulk packed

GE Syringe filter CA 30mm .8uM 200/pk

GE Syringe filter CA 30mm .45uM 500/pk

GE Syringe filter CA 30mm .45uM 50/pk

GE Syringe filter CA 30mm .22uM 200/pk

GE Syringe filter CA 25mm .8uM 500/pk

GE Syringe filter CA 25mm .45uM 500/pk

GE Syringe filter CA 25mm .45uM 50/pk

GE Syringe filter CA 25mm .22uM 200/pk

Empty