Bead beater ideal for lysing, extraction, or homogenization applications, utilizing an aggressive vertical mixing motion. Supplied with holders to hold vertically 12 microtubes (1.5 or 2.0ml), 6 15ml tubes, or 3 50ml tubes, and 12 microtubes (1.5 or 2.0ml) horizontally. Beads are also available and sold separately for complete bead beating solution. The Bead Genie, built in the USA, is compact compared to most bead beaters and homogenizers, yet heavy and durable.
The Vortex-Genie 2T offers all the same features as the Vortex-Genie 2, including variable speed control, (which provides a range of operation from slow-speed shaking up to high-speed vortexing), and a multiple-position power switch that allows the operator to choose Touch On control or the Hands-Free continuous operation of the switch-activated start/stop mode. The Vortex-Genie 2T adds an integral timer: 1 to 60 seconds in the Touch On mode, 1 to 60 minutes in the Hands-Free mode. Action shuts off automatically after a set time in both modes. Unit can also be set to run continuously. Vortexing time is constant, with an accuracy of ±5% and a ±1% repeatability.
As with the Vortex-Genie 2, a wide range of attachments of various shapes, sizes and materials, each with its own mixing action, is available to allow the operator to mix almost all common tubes and containers with the correct mixing action for any application. The tough metal rubber-footed housing provides a stable platform that will not walk across your benchtop. Includes a 3-diameter (7.6cm) platform and a Pop-Off Cup. Base dimensions: 6.5L x 4.8W x 6.5H (165 x 122 x 165mm). Weight: 8.8 lbs (4kg). 120VAC, 60Hz, 0.65 amps. Two-year manufacturer™s warranty. ETL listed, conforms to UL standard 3101-1.
See: Vortex-Genie Accessories.
The Vortex-Genie 2® features variable speed control, providing a range of operation from slow-speed shaking up to high-speed vortexing. The three-position power switch allows the operator to choose Touch On control or the hands-free operation of continuous action, greatly increasing lab efficiency.
A wide range of attachments of various shapes, sizes and materials, each with its own mixing action, allows the operator to mix almost all common tubes and containers with the correct mixing action for any application. The tough metal rubber-footed housing provides a stable platform that will not walk across your benchtop. Includes a 3-diameter (7.6cm) platform and a Pop-Off Cup. Base dimensions: 6.5L x 4.8W x 6.5H (165 x 122 x 165mm). Weight: 8.8 lbs (4kg). 120VAC, 60Hz, 0.65 amps. Two-year manufacturer™s warranty. UL listed, CSA approved.
See Vortex-Genie® Accessories.
The very affordable Vortex-Genie 1 provides violent high-speed vortexing action for touch mixing. Single high speed eliminates operator variability. Enhanced vortexing ability increases efficiency, reducing vortexing time. Comes with Pop-Off Cup. Optional 3-diameter (7.6cm) platform attachment accommodates beakers, flasks or multiple tubes.
Highly stable on rubber feet, the Vortex-Genie 1 will not walk across your benchtop. Solid cast-metal base and stainless steel construction provide years of reliable service. Base dimensions: 6.5L x 4.8W x 6.5H (165 x 122 x 165mm). Weight: 8.8 lbs (4kg). 120VAC, 60Hz, 0.65 amps. Two-year manufacturer™s warranty. ETL listed.
See: Vortex-Genie Accessories.
The Disruptor Genie Cell Disrupter is ideal for any application that requires extremely violent high-speed agitation, such as difficult glass bead procedures, cell disruptions or homogenizations of yeast cells, bacteria, plant and animal tissue. The multidirectional action agitates and vortexes simultaneously at high speed, producing greater yields in less time. The Disrupter Genie is simple to use. Just set the auto-off timer from 0 to 15 minutes, or set it to run continuously. The single high-speed agitation eliminates operator variability.
Accommodates up to twelve 1.5mL snap-top microcentrifuge tubes. An optional holder accepts twelve 2.0mL screw top microcentrifuge tubes (see above). Or remove the microtube holder and snap on the Pop-Off Cup (included) for the high-speed vortexing of single test tubes. Enhance the performance of the unit with the use of soda-lime glass Disruptor Beads (sold separately). The Disruptor Genie is suitable for cold room or incubator use. Highly stable on rubber feet, it will not walk across your benchtop. Solid cast-metal base and stainless steel construction provide years of reliable service. Base dimensions: 6.5L x 4.8W x 7.5H (165 x 122 x 190mm). Weight: 9.5 lbs (4.3kg). Two-year manufacturer™s warranty. ETL listed. (120V, 60Hz, 0.65 amps)
This kit contains the Bottom Closure with Feet and (4) Screws. The Bottom Closure can be easily installed using either a 1/4" nut driver or pliers. Will fit onto Vortex-Genie 1, Vortex-Genie Pulse, Disruptor Genie, and Vortex-Genie 2 Family of mixers.
Magnetic Bag Mounting Strips, 16/Pk
Clip Plate for 3 Each 28-30mm Tubes
Clip Plate for 6 Each 15-17mm Tubes
Clip Plate for 12 Each 10-13mm Tubes
Clip Plate for 3 Each 28-30mm Tubes, 6/P k
Clip Plate for 6 Each 15-17mm Tubes, 6/P k
Clip Plate for 12 Each 10-13mm Tubes, 6/ Pk
The 3-D Orbital Shaker Attachment for the Roto-Shake Genie provides gentle yet thorough mixing of dishes, flasks, beakers and open containers. It moves at a 5 degree angle through a 360 degree rotation (providing a combination of vertical and horizontal motions). This means that every corner or crevice of a container will receive complete mixing, making it the perfect choice for applications such as gel and blot staining/blocking, sample washing, polymer resin preparation, and more. Please note, platform capacity is 1 Kg (2.2 lb).
High-density Foam Inserts for each of the following: 9-16mm Tubes, 14-29mm Tubes, 29-37mm Tubes. A Blank Foam Insert is also included for user customization. Each insert fits into the Recessed Platform (Part No. 504-0039-00) and one of each is included in the Large Sample Set (Model H302, Part No. 503-0282-00) for use with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse.
Two high-density Foam Inserts are customizable by the user for odd-shaped vessels. The insert fits into the Recessed Platform (Part No. 504-0039-00) for use with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse. One insert is included in the Large Sample Set (Model H302, Part No. 503-0282-00)
Two high-density Foam Inserts to accommodate 14-29mm diameter tubes. The insert fits into the Recessed Platform (Part No. 504-0039-00) for use with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse. One insert is included in the Large Sample Set (Model H302, Part No. 503-0282-0)
Two Elastic Bands securely fasten various sample vessels to the Recessed Platform (Part No. 504-0039-00). Two bands are included in the Large Sample Set (Model H302, Part No. 503-0282-00) for use with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse. Sample vessels of up to 500ml can be used as well as microplates.
The Large Ampule/Tube Attachment can be used with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse and provides vigorous end-to-end agitation combined with vortexing of up to four 10mm-17mm diameter tubes or ampules
The Small Ampule/Tube Attachment can be used with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse and provides vigorous end-to-end agitation combined with vortexing of up to four 15mm-17mm diameter tubes or ampules.
Metal clip plate to accommodate up to 4 100-ml Volumetric Flasks. This can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie.
Plastic box with hinged lid holds up to (100) 1.5ml or 2.0ml microtubes. A maximum of 4 boxes, 2 per side, can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Enviro-Genie or Incubator-Genie. A maximum of 8 boxes, 4 per side can be attached to the Magnetic Platform for use with the Rotator Genie.
Pack of 2 clip plates with two elastic bands each for use with odd-shapped sample vessels. This can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie.
Serial Cable may be used to connect the Enviro-Genie to a computer via a serial port for data capture or programming. It is a standard 9-pin, female to female straight through serial cable.
Your message has successfully been sent. We will respond back soon
Email entered was invalid.
Name, Email, and your message are all required
On Thursday, May 2nd, we will be implementing a new phone system. During this time our system will be completely down. Please contact us at [email protected] and we will get back to you as soon as possible.
